News

Matters needing attention in the use of small liquefied gas compressor

1. Before starting, check the pipelines and valves for no leakage, and make sure that the lubricating oil level reaches the standard and the filter device is not blocked; It is strictly forbidden to start the pipeline when it is damaged or the seal is aging. The surrounding area should be cleared of flammable sundries such as cartons and oil stains, and ventilation and heat dissipation space should be reserved.

2. Continuously observe the pressure and temperature values during operation, and stop immediately if there is abnormal sound, abnormal hot fuselage and sudden pressure rise and drop; Do not operate under excessive pressure for a long time, and it is forbidden to run the equipment without load or with faults continuously.

3. Shut down the air inlet valve first, and then cut off the power after the residual liquefied gas in the air exhauster; Clean the filter element regularly, change the lubricating oil, and be sure to release pressure and ventilate before overhaul; The equipment shall be far away from naked flame, high temperature and static power supply, and the operators shall not leave their posts to be on duty.